# Ultra-Wideband General

**URL:** https://forum.leapslabs.com/c/ultra-wideband-general/9.md

[Latest](https://forum.leapslabs.com/latest.md) · [Categories](https://forum.leapslabs.com/categories.md) · [Tags](https://forum.leapslabs.com/tags.md)

---

## [About the Ultra-Wideband General category](https://forum.leapslabs.com/t/about-the-ultra-wideband-general-category/21)

<div class="topic-metadata">

**Author:** [@admin](https://forum.leapslabs.com/u/admin)\
**Replies:** 0

</div>

This category, it contains all topic, which is not fit to specific UWB products

---

## [Leaps\_reset over BLE doesn't cause disconnect (works fine over UART)](https://forum.leapslabs.com/t/leaps-reset-over-ble-doesnt-cause-disconnect-works-fine-over-uart/128)

<div class="topic-metadata">

**Author:** [@Trevordeanglass](https://forum.leapslabs.com/u/Trevordeanglass)\
**Replies:** 4\
**Last updated:** [September 14, 2026, 6:17am UTC](https://forum.leapslabs.com/t/leaps-reset-over-ble-doesnt-cause-disconnect-works-fine-over-uart/128 "2026-09-14T06:17:12Z")

</div>

Hi, We’ve found a reproducible discrepancy between leaps\_reset sent over BLE vs over UART/USB, on LC14\_B boards (v1.1.0-a25271). Over UART (via the shell’s tlv command): sending leaps\_reset (type 0x14, no payload) reli…

---

## [Leaps\_autopos\_start position appears cached, doesn't update after device is moved](https://forum.leapslabs.com/t/leaps-autopos-start-position-appears-cached-doesnt-update-after-device-is-moved/129)

<div class="topic-metadata">

**Author:** [@Trevordeanglass](https://forum.leapslabs.com/u/Trevordeanglass)\
**Replies:** 6\
**Last updated:** [September 11, 2026, 4:26pm UTC](https://forum.leapslabs.com/t/leaps-autopos-start-position-appears-cached-doesnt-update-after-device-is-moved/129 "2026-09-11T16:26:11Z")

</div>

We’ve discovered that a device’s absolute position (from leaps\_loc\_get’s 0x41 block) after leaps\_autopos\_start appears to be cached from its FIRST successful trigger, and does not update on subsequent triggers even aft…

---

## [Device stuck showing solid (not blinking) green LED, not advertising over BLE after cfg change + reset](https://forum.leapslabs.com/t/device-stuck-showing-solid-not-blinking-green-led-not-advertising-over-ble-after-cfg-change-reset/127)

<div class="topic-metadata">

**Author:** [@Trevordeanglass](https://forum.leapslabs.com/u/Trevordeanglass)\
**Replies:** 4\
**Last updated:** [September 9, 2026, 9:16am UTC](https://forum.leapslabs.com/t/device-stuck-showing-solid-not-blinking-green-led-not-advertising-over-ble-after-cfg-change-reset/127 "2026-09-09T09:16:38Z")

</div>

Hi, One of my LC14\_B devices (addr=DECA687912909D04) has stopped advertising over BLE after a configuration test, and I can’t get it visible to a central again. Details: • Sequence: sent leaps\_cfg\_anchor\_set with led\_e…

---

## [Exact TLV opcode/payload for leaps\_ble\_evt\_cfg\_set](https://forum.leapslabs.com/t/exact-tlv-opcode-payload-for-leaps-ble-evt-cfg-set/126)

<div class="topic-metadata">

**Author:** [@Trevordeanglass](https://forum.leapslabs.com/u/Trevordeanglass)\
**Replies:** 1\
**Last updated:** [September 7, 2026, 6:10am UTC](https://forum.leapslabs.com/t/exact-tlv-opcode-payload-for-leaps-ble-evt-cfg-set/126 "2026-09-07T06:10:41Z")

</div>

Hi, I’m building a custom app (React Native, iOS) that connects to a LEAPS UWBS device over BLE using the documented UWBS GATT service and its Request/Response/Events characteristics. I’ve successfully implemented the T…